The DryXtreme NA adsorption dryers offer dew points from - 40°C to -70°C allowing accurate and efficient operation in many critical applications such as the chemical-pharmaceutical, food, electronic, automotive industries or in external, low temperature installations. All this within a compact and technologically-advanced package.

The NA dryers feature two painted extruded aluminium vessels, each equipped with a cartridge containing absorbent material (molecular sieve). The compressed air is dried alternately by the 2 cartridges, which are regenerated via a small part of the air already treated, when the absorbent material becomes saturated with moisture.

DE iTECH  is the new generation of energy saving refrigeration cycle dryers with which MTA not only renews its range of products for the processing of compressed air but reinterprets the concept of thermal mass to which the DE Hybrid dryers owe their success. The innovative Impulse Technology system offers important advantages in terms of energy savings, reliability and management costs thanks to the ability of DE iTECH to adapt perfectly to the real requirements of the system. The dryer adjustment system controls its operation and ensures the ideal energy solution for drying of the compressed air, allowing high savings and at the same time excellent stability of the dew point, even under dynamic conditions.

DE-X refrigeration dryers offer accurate dew point control in an easy-to-use package with very wide operating parameters and a strong focus on reducing overall global impacts. Unique features and patented technologies ensure the requirements of individual industrial applications are fully catered for.

Benefits:

• Market leading pressure drops, on average below 0,11 bar, ensuring significant energy savings.
• Environmentally friendly low Global Warming Potential (GWP) refrigerant R513A on DE-X 003-090, with a GWP of only 573.
• Unique patented 3-in-1 X-MODULE heat exchanger, designed by MTA.
• Always operates in all conditions, with extensive air inlet temperature, ambient temperature and maximum pressure limits.
• High reliability, with field proven technologies and premium components.
• Easy to install thanks to compact dimensions, a single wired power source and full frontal access.
• Easy to use: intuitive microprocessor, avoids field adjustment requirements, low maintenance needs.
• Multiple condensate drain configurations covering every User need.
• Accurate dew point control across the full 0-100% load spectrum, with quick reactions in response to sudden peaks.
• Low Load Function (LLF) protects against freezing, simplifies seasonal adjustment needs, allows stand-by savings at low ambient temperatures.
• Industry 4.0 ready, with multiple remote connectivity options.
• Extensive individual factory testing (operating sequences, refrigerant leakages, safety devices, electrical safety).

The HPDry has been studied specifically for high pressure drying requirements (e.g. the production of PET bottles). The extremely strong construction with shell and tube heat exchangers with stainless steel pipes, ensures safe and continuous operation in any conditions.
HPDry is an energy saving dryer as it exploits the operational advantages of the thermal storage principle: a hydraulic vessel on the machine accumulates cold, acting as a thermal storage. This allows the dryer to automatically adapt to the air flow and ambient conditions, ensuring energy savings, which at partial loads can typically vary from 30 to 80%.
All HPDry models are made up from a chiller used to cool the compressed air passing through the gas/water shell and tube heat exchanger, allowing the moisture to be removed.

Specifically designed to dry the Biogas destined to power the co-generators, EnerDryer is extremely compact and suitable for outdoor installation. The strong galvanized steel beam structure supports the dryer and features an industrial chiller with an integrated hydraulic module and a thermally insulated drying system, in turn formed by a gas/water heat exchanger, an economizer exchanger and a condensate separation and drain system. All parts in contact with the biogas are in stainless steel, ensuring stable and secure operation through time.

The condensate contains large quantities of oil and impurities, which if freely drained create significant environmental damage. For these reasons, most countries have implemented strict condensate drain legislations. Solutions which do not guarantee the required draining quality lead to the risk of significant fines, whilst traditional treatment solutions present a notable financial burden. LiquiPure LP is water-oil separation system for non-emulsion oily condensate, which solves this problem at a low cost and with low maintenance and guarantees the separation in accordance with local legislations.

Final water coolers from the CoolPro – WE/WF series allow the efficient and economical purification of compressed air by cooling the air at the outlet of the compressor at an outlet temperature of only 10°C higher than that of the inlet water. This cooling causes condensation of up to 80% of the moisture present in the compressed air that can be separated thanks to an AS/MS centrifugal condensate separator installed at the outlet of the cooler. The WE/WF final coolers consist of a shell and tube exchanger cooled in perfect countercurrent by a flow of cooling water.

ESM 2 - 5 series compressors are extremely energy efficient, silent, reliable and easy to operate. It is an air-cooled, one-stage rotary screw compressor with oil injection, a Gardner Denver screwdriver with belt drive, starter acceleration or star-delta and load / unload control. The design ensures long service life and optimum air quality. They meet the high demands of a modern work environment and machine operators. Compressors can be equipped with accessories that satisfy even the most demanding requirements for flexible compressor station solutions.

The heat regenerated adsorption air dryers in the DryXtreme – NST range treat large volumes of compressed air as the air flow of treated air necessary for regeneration is minimal. The dew point of- 40 °C allows accurate and efficient operation in many critical applications such as the chemical-pharmaceutical, food, electronic, automotive industries or in external, low temperature installations. The NC dryers are made up from two painted carbon steel vessels, both filled with absorbent material (activated alumina). The compressed air is dried alternately by the 2 towers, which are regenerated through combination of the heat emitted by a heater inside each vessel and a minimum flow rate of dry air.

NC DryXtreme adsorption dryers offer dew points from - 40°C, and allow precise and efficient operation in several critical applications such as the chemical-pharmaceutical, food, electronics and automotive industry or in low temperature outdoor installations. 

The NC dryers consist of two tanks in painted carbon steel, each of which is filled with adsorbent material (exclusive adsorbent activated alumina/molecular sieve mix). The compressed air is dried alternatively by 2 columns which are regenerated by a minimal part of the air that has already been treated when the adsorbent material becomes saturated with moisture.