ETM DM are modular units for compressed air treatment that can be interconnected using MASTER/SLAVE logic. Each unit integrates a highly efficient compact aluminum exchanger, separation system, and condensate drain. In the MASTER configuration, ETM DM modules include an electronic control unit that ensures proper operation.

Standard features:

• Extremely robust 2-in-1 heat exchanger consisting of an air-to-air heat exchanger and an air-glycol-water heat exchanger – optimized for counterflow exchange.
• Condensate separator for perfect condensate separation even with reduced compressed air flow, removable via Victaulic connection.
• Microprocessor control and management of standard energy savings on MASTER modules.
• DDF dynamic dew point energy saving function with ambient temperature "tracking logic" (DDF ambient temperature sensor kit required).
• Contact without general alarm.
• Remote control ON/OFF liquid cooler.
• Timed standard condensate drain with fully adjustable cycle times via microprocessor.
• Safety system to protect against condensate freezing.

The new thermal mass cycling refrigerated air dryers DE ETM represents the best solution for the treatment of high compressed air flow for all those applications that require low energy consuption, reliability and high performance. 

The DE ETM thermal mass technology allows the units to adapt their own energy consuption to the actual load, ensuring over 80% of savings compared to traditional air dryers. DE ETM energy saving capacity can be further improved by activating the DDF system, an advanced technology of the microprocessor control that automatically regulates the DEW point on the basis of the ambient temperature, in order to reduce the absorbed power of the compressors. The new high efficiency heat exchanger, with optimized countercurrent exchange and integrated air-to-air exchanger, ensures low energy consuptions and minimized pressure drops. The accurate design and the integrated demister separator ensure a precise DEW point and the protection from any risk of condensation freezing.

DE ETM air dryers integrate a reliable industrial chiller, whose tank works as thermal mass. The careful choice of high quality materials and components ensures the dryer to work for long times reducing the possibility of damage. The special bar&plate technology of heat exchangers allows DE ETM to work with compressed air load from 32 to 225 m³/min, keeping precise the DEW point in all conditions and low pressure drops.

ESM 160 - 290 series compressors are extremely energy efficient, silent, reliable and easy to operate. It is an air-cooled, one-stage rotary screw compressor with oil injection, a Gardner Denver screwdriver with direct drive and load / unload control. The design ensures long service life and optimum air quality. They meet the high demands of a modern work environment and machine operators. Compressors can be equipped with accessories that satisfy even the most demanding requirements for flexible compressor station solutions.

VS 160-290 series compressors are extremely energy efficient, silent, reliable and easy to operate. It is an air-cooled, one-stage rotary screw compressor with oil injection, a Gardner Denver screwdriver with belt drive and with frequency converter (continuous regulation). The design ensures long service life and optimum air quality. They meet the high demands of a modern work environment and machine operators. Compressors can be equipped with accessories that satisfy even the most demanding requirements for flexible compressor station solutions.

Yes, this really is the world's largest, single-stage, air-cooled rotary vane vacuum pump. Pneumofore's legendary UV Series models currently installed in industrial plants worldwide evacuate a monstruous billion+ m³ each year. And not only more reliably, but also more efficiently than any other vacuum pump. These pumps cover a wide vacuum range and offer single stage 250 to 3.240 m³/h [148 to 1908 cfm] with the residual pressure of 0,5 to 450 mbar(a) [29,90 to 16,62 inHg V]. Capacity and residual pressure are extended with multiple stage machines.

Compressed air is used commonly used to power tools and equipment in production and finishing processes or to activate valves and instruments. The compression process itself causes the concentration of moisture, of the lubricant oil vapours and the particles of impurities present in the air sucked from the compressor, up to levels that can damage the pneumatic equipment, increase the need for maintenance or ruin the finished product. DryPlus has been developed for the most discerning Users, offering advanced technological solutions. DryPlus is the optimal solution for those who require a dryer suitable for high air flow, fully customizable to the specific needs of the system. All models BD can be equipped with scroll compressors / screw / piston with high efficiency and are equipped with a regenerative tube bundle heat exchanger air / air and an evaporator finned battery capable of ensuring extremely low dew points in all conditions of use as well as to minimize the pressure drops and energy consumption.

Stable operation
• Complying with global industry standards as ISO9001 , API672 and customer specific requirements
• 100% Oil-Free compressed air without any contamination: ISO 8573-1 Class 0 certification
* ISO 8573-1 specifies purity classes of compressed air with respect to particles, water and oil independent of the location in the compressed air system at which the air is specified or measured
• Using three-dimensional design system to eliminate potential design flaws in the design phase
• Thorough quality control system in every single process to get rid of any risks
• The fastest growing in the industry since 1997
• Certified by major players in various industries in ME, Europe, Americas etc.

Saving the budget
• High efficiency oriented components and low maintenance design will provide customers with lower life-cycle cost
• Energy saving analysis to diagnose current status and find the root cause of energy waste can minimize the unnecessary cost and keep customers’ profit high

Risk-free
• Preventive maintenance program provides a guideline or an actual check service for keeping customer’s equipment healthy
• Remote Monitoring System does daily check of customer’s equipment, and provides prompt alarm/notification service once any problem happens
• RUSH112 service and wide range of service network minimizes downtime when emergency situation occurs

Air Cooled Type

● SM2000-derived product that reflected the market

   demands and cutting-edge air dynamic technology

● Module engineering with largely reduced maintenance

    time compared to non-module type compressor

● One-body package design where every component

    is mounted on the base frame

● Low-noise enclosure of full-open structure

   with high openness (0ptional)

Flexible packages according to your needs
• Packaged plug & play type for easy installation
• Standard type without base frame, silencer, cooling water manifold and enclosure
- Silencer and cooling water manifold can be added as an option

Advanced efficiency and performance through design modification
• Thrust collar applied to enhance operation reliability and mechanical efficiency by reducing mechanical loss and oil consumption
• Labyrinth seal of non-contacting type minimizing mechanical loss and needs of replacement
• Reduced distance between shafts to minimize oil mist friction and mechanical loss for improved performance and isothermal efficiency